Continuous Data end-of-life notice

Action required: The Continuous Data UI, API, and CLI are scheduled for end of life. Review the latest migration guidance and start planning your transition to Data Control Tower.

On new engine installations of 2026.5.0.0 and later, the Admin UI opens directly to the Performance Dashboard, and the Manage, Resources, and System menus are unavailable. Engines upgraded from an earlier version keep full Admin UI access. This restriction cannot be changed by customers; contact Delphix Support if you need it lifted temporarily.

Learn more about the Continuous Data end-of-life announcement.

Change the IP address

  1. Stop all running VDBs by clicking the Stop button on the VDB card.

  2. Disable all dSources.

    Verify full network settings when changing subnets

    If the new IP address is on a different subnet, changing only the interface address is not sufficient. You must also update the default route, DNS servers, DNS domain, DHCP setting, and hostname as required. If you do not update these values, the engine can become unreachable and require console access.

    For details, read Set up engine network access.

  3. You can use either the command-line interface or the Delphix Setup application to change the IP address of the Delphix Engine.

    1. To use the command-line interface, follow the instructions described in Set up engine network access.

    2. To use the Delphix Setup application, go to System > Server Setup in the Delphix Management interface, or click Server Setup in the Delphix Engine login screen.

      1. In the Network panel, click Modify.

      2. Under DNS Services, enter the new IP address.

      3. Click OK.

  4. Refresh all Environments by clicking the Refresh Symbol on the Environments screen.

  5. Enable all dSources.

  6. Start all VDBs by clicking the Start button on the VDB card.

Change the IP address via CLI

  1. Stop all running VDBs by clicking the Stop button on the VDB card.

  2. Disable all dSources.

    Verify full network settings when changing subnets

    If the new IP address is on a different subnet, changing only the interface address is not sufficient. You must also update the default route, DNS servers, DNS domain, DHCP setting, and hostname as required. If you do not update these values, the engine can become unreachable and require console access.

    For details, read Set up engine network access.

  3. Log into the Delphix CLI using your sysadmin account. You can find instructions on how to do this in the Connecting to the CLI article.

    delphix> network
delphix network> interface
delphix network interface> ls
NAME     
vmxnet3s0
delphix network interface> select vmxnet3s0 
delphix network interface 'vmxnet3s0'> get
    type: NetworkInterface
    name: vmxnet3s0
    addresses:
        0:
            type: InterfaceAddress
            address: 10.1.2.3/24
            addressType: STATIC
            enableSSH: true
            state: OK
    dataNode: DATA_NODE-34
    device: vmxnet3s0
    macAddress: 0:c:29:32:96:a3
    mtu: 1500
    mtuRange: 60-9000
    reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
    state: OK

  4. Run the update command and update the address to the new IP address for the Delphix Engine. 

    delphix network interface 'vmxnet3s0'> update
delphix network interface 'vmxnet3s0' update *> edit addresses.0
delphix network interface 'vmxnet3s0' update addresses.0 *> get
Properties
    type: InterfaceAddress
    address: 172.16.151.154/24
    addressType: STATIC
    enableSSH: true
    
delphix network interface 'vmxnet3s0' update addresses.0 *> set address=10.1.2.4/24
delphix network interface 'vmxnet3s0' update addresses.0 *> get
    type: InterfaceAddress (*)
    address: 10.1.2.4/24 (*)
    addressType: STATIC (*)
    enableSSH: true (*)

  5. Commit the operation.

    delphix network interface 'vmxnet3s0' update addresses.0 *> commit
delphix network interface 'vmxnet3s0'> get
    type: NetworkInterface
    name: vmxnet3s0
    addresses:
        0:
            type: InterfaceAddress
            address: 10.1.2.4/24
            addressType: STATIC
            enableSSH: true
            state: OK
    dataNode: DATA_NODE-34
    device: vmxnet3s0
    macAddress: 0:c:29:32:96:a3
    mtu: 1500
    mtuRange: 60-9000
    reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
    state: OK

  6. Re-enable the VDBs and dSources running from the engine. 

Last updated
Oct 9, 2026